Description
Getting tired of poor performance from your OEM granny charger?
This is the perfect low-cost single phase 10A portable charger replacement. Ideal for all EV drivers.
This charger has a 15A plug attached (that’s with the larger earth pin), if you need to charge from a standard 10A household outlet grab yourself a 15A to 10A adapter from Bunnings and make sure you dial-down the charger to at least 10A.
BYD Atto3 owners – finally you can counteract the BYD-imposed de-rating safety margin. Contact us to learn how.
Features:
- Maximum amperage 15A – 3.6kW (theoretical) single phase
- Compatible with all EVs that use a CCS2/Type 2 inlet
- 5m long cable
- Selectable charging current and delayed start time
- Integrated Residual Current Device (Type A RCD (AC/DC Protection))
- Adjustable power settings 8A/10A/12A/13A/15A, conforms to Australian conditions
- Applicable for voltages up to 250V
- 5m black TUV certified cable
- Water and dust protection: IP65
- Meets Standards: IEC 62752
- CE Approved
- RCM compliant
- Operating temperature range: -25°C to +45°C.
To change charging current:
- Ensure wall socket is switched off.
- Connect the plug into wall socket and turn on. A short beep is heard.
- Display screen lights up, power LED is lit in orange colour.
- Tap gear icon, a beep is heard, keep holding for 2seconds another beep is heard. Release.
- Tap gear icon to select desired current. Each tap cycles down from 15A to the available choices 13A, 12A, 10A, 8A then repeats.
- To lock in the change, tap and hold gear icon, a beep is heard. Release.
- The new charging current is remembered between charging sessions.
- Settings Mode will time-out if no changes are detected with 4 seconds.
To set delayed charging:
- Tap and hold gear icon, a beep is heard. Keep holding for 2seconds another beep is heard. Keep holding for another 2seconds, two beeps are heard. Release.
- Tap gear icon to select desired time delay. Each tap cycles through the available choices as follows: 1H, 2H, 4H, 6H, 8H, 10H.
- To lock in the change, tap and hold gear icon, a beep is heard. Release. Display screen shows time countdown.
- Settings Mode will time-out if no changes are detected with 4 seconds
jim barrington (verified owner) –