Use the Pull-down menu, set the “EVSE Amperage” to 16A or 32A to suit your Tesla (see below) and you will receive your EVSE of choice fitted with 5pin CEE plug PLUS
a 3m 32A 3phase tail, PLUS
a 3m 20A 3phase tail, PLUS
a 3m 15A tail, PLUS
a 3m 10A tail…
… all for $1395 for 11kW EVSE or $1695 for 22kW EVSE PLUS
A FREE carry bag worth $40!
Which EVSE Amperage to choose? That depends on which model Tesla you wish to use the portable charger and the current available at your charging location.
Choose 16A – 11kW – if available current is equal or less than 16A (single or 3 phase) and you will use it for Model 3 (all variants) or Model S/X with single on-board charger (pre-Raven).
Choose 32A – 22kW – if available current is equal or less than 32A (single or 3 phase) and you will use it for Model 3 (all variants) or Model S classic-nose with dual on-board charger or Model S/X with single charger with hi-power upgrade and all Raven variants.
And as an added benefit, if you are a Model 3 or Model S and X Raven owner and use your Gen2 Mobile Connector and tails for overnight charging, using our 10A and /or our 15A tail included in this Bundle, you will receive the full current, i.e. 10A or 15A – i.e. you won’t be limited to 8A / 12A due to the design of the Gen2 10A and 15A tails. That is a 25% increase in charging power, or a 20% reduction in charging time for same amount of range.
Note: if using our Portable Charger with either the 10A or 15A tail, before connecting the plug to the car, make sure you set the correct current draw suited to the socket by pressing the Amperage button on the EVSE and selecting 10A or 15A.